Autotuner now offers specific datalogging for the Renault group. Unlike generic datalogging based on OBD-II standard codes, specific datalogging relies on manufacturer-defined codes.
On the following ECUs:
- Bosch : EDC16CP42 / EDC17C11 / EDC17C42 / EDC17C84 / EDC17CP19 / EDC17CP58 / MD1CS006 / MD1CS016 / ME17.7.20 / ME17.9.20 / ME17.9.23
- Continental : EMS3110 / EMS3125 / EMS3140 / EMS3141 / EMS3150 / EMS3155 / EMS3160 / EMS3161 / EMS3180 / SID307 / SID309 / SID310 / SID321
- Delphi : DCM3.4
- Hitachi : BED434 / BED436 / BED501
- Sagem : S3000
- Siemens : SID305 / SID306
- Valeo : V40 / V50.1
Measured data:
AIR - Atmospheric pressure
- Camshaft position
- Mass air flow
- Mass air flow setpoint
| BASICS - Engine speed
- Gas pedal position
- Gear
- Vehicle speed
| BOOST - Boost pressure
- Boost pressure setpoint
- Wastegate duty
| EMISSIONS - Distance after successful regeneration
- EGR rate
- Is regen active ?
- Particulate filter differential pressure
- SCR tank level
- Soot mass
| FUEL - Fuel high pressure
- Fuel high pressure setpoint
- Fuel low pressure
- Fuel low pressure setpoint
- Fuel pressure regulator
| IGNITION - Ignition advance timing
- Ignition withdrawal
- Knock counter
| INJECTION - Injection advance
- Injection duration
- Lambda
- Lambda setpoint
- Main injection quantity
- Long term fuel trim
- Short term fuel trim
| LOAD / TORQUE - Absolute Load value
- Engine torque
- Gearbox torque limitation
- Max engine torque
- Throttle valve position
- Torque limitation
| TEMPERATURE - Atmospheric air temperature
- Engine coolant temperature
- Engine oil temperature
- Exhaust gas temperature
- Intake air temperature
|
|
Login 
